Autonics LP-S044 - Feature of LP

1 Overview
14 © Copyright Reserved Autonics Co., Ltd.
1.2 Feature of LP
 Compact structure
LP realizes as one with power, PLC, HMI, I/O modules.
 Logic specification
LP has 8000 step program capacity.
It supports 28 basic instructions and 233 application instructions.
 Wide device range
LP supports auxiliary device 10K Word, data device 10K Word and other several devices.
 Variable external I/O than equivalent product
LP supports input 16 points/ output 16 point basically. (Terminal block connector, ribbon
cable connector)
 Expansion function; external interrupt, matrix, 7Segment, synchronous communication, etc.
Supports expansion function; external interrupt, matrix 16 key input, 7 Segment output,
synchronous communication output, etc.
 Space saving and simple wiring
Automation system with LP series saves install space and provides simple wiring.
 Cost saving for install and maintenance
Automation system with LP series saves cost and time for install and maintenance.
 Product upgrade by web site
We offer LP firmware, GP Editor, SmartStudio, protocol, language and font, various
manuals at www.autonics.com to download conveniently.
 Monitoring function of other type controller
By PLC connection port, LP monitors and controls the variable of additionally connected
controller (PLC, etc).
 Communication between heterogeneous controllers
You can connect other type controller to serial port separately.
LP monitors two different controllers simultaneously and relays communication between two
controllers.
 Multi monitoring function
You can connect same type of several controllers.
 Supports multilingual
LP supports Korean, English and the other languages are available for the later.
 Supports several font
LP supports various bitmap font and vector font. You can select the desired font and use it.

Multi communication port
LP supports several communication port such as RS232C / RS422 serial communication
port, USB HOST USB DEVICE, and Ethernet.
Two serial ports of RS232C / RS422 are designated for the device connecting by software
(PLC, computer, printer, barcode reader, etc). By supported communication type of
connected device, select port to communication.
 Monitoring function for controller device
Without designed data, LP menu is available for monitoring connectable controller device.
 Printer and barcode reader connection