Autonics LP-S044 - Menu Call Key; Buzzer

6 System Screen
56 © Copyright Reserved Autonics Co., Ltd.
6.4.5 Menu call key
Check or select the position of system setting menu key to enter from user screen.
No.
Function and operation
①
Displayed that this position is already designated for system setting menu key.
②
You can designate system setting menu key up to two keys. If two keys for system setting
menu is set, you should touch both two keys simultaneously to enter system setting menu.
In case screen direction is vertical (bottom side from front screen is placed at left status), default
position of system setting menu key is placed at left-upper point.
Touch left-upper point as soon as re-supply power and it enters to system setting menu.
If there is numeral/ASCII input or touch key tag at system setting menu key position, it executes
only tag operation and it does not enter system setting menu.
6.4.6 Buzzer
Designate buzzer on or off for touch key operation, numeral or ASCII input touch, system setting
menu touch, communication start and complete, or alarm.
No.
Function and operation
①
Touch this, buzzer turns on.
It displays contrast item is not set.
②
Touch this, buzzer turns off.