4 System Organization
42 © Copyright Reserved Autonics Co., Ltd.
4.7.1 GP Editor configuration
1st Select [Common]-[GP/PLC Type] of GP Editor menu.
Desigante GP/LP type as the model name LP-S044 by pull-down menu.
2nd Select [Communication]-[Option] and ‘Option’ dialog box appears.
Designate communication configuration as same as that of from LP-S044. (LP-S044
supports only serial communication, therefore Ethernet and USB communication are
not activated.) For more details of each option, refer to ‘GP Editor user manual’.
3rd After configuration, connect LP and PC by communication cable to download and
upload drawn program from GP Editor.
To Next Page
Loading...