6 System Screen
© Copyright Reserved Autonics Co., Ltd. 55
6.4.3 Clock
This menu is for setting or checking current time.
①
Designate user designate time and data from current time.
0 to 9: Input set time.
CLR: Cancel set value input and cursor disappears.
ENT: After completing configuration, moves cursor to next input.
Touch [ENT], cursor moves year, month, day, hour, min, sec in order.
When new date type is designated in GP Editor, cursor moves to display order.
②
Displays current set date and time in real time.
Touch to reset item; year, month, day, hour, min, sec, and cursor appears to input.
Designated time is applied for clock, alarm history, alarm list, etc which are related with time.
If external power is cut, current time is maintained by battery. If there is time error with connected
external power, battery may be discharged. Please check battery status from [SET
ENVIRONMENT]-[BATTERY] of system setting menu.
6.4.4 Clear USER DATA
This menu is for initializing user data and setting values of LP.
Be sure that once deleted data cannot recover.
Be sure that once deleted data cannot recover.
Especially for saving alarm history contents, by GP Editor upload alarm history and alarm
frequency with checking ‘Alarm History (Alarmhistory.txt)’ and ‘Alarm Frequency
(Alarmfrequency.txt)’ in tag box of ‘Monitor Data Upload’ dialog box from [Communication]–
[Upload] menu to save txt files.
If LP and serial printer is connected, you can print alarm history in [SET FUNCTION] – [PRINT
OUT] of system setting menu.
①
Touch ‘CLEAR GP DATA’ and it initializes every data of screens of LP, part,
comment, and common configuration information. After completing initializing, user
screen displays ‘USER SCREEN IS NOT FOUND’ message.
②
Touch ‘CLEAR LP DATA’ and it deletes ladder program, parameter, device data.
During downloading user-designed data and ladder data, if download is stop in the middle of
progressing by power and cable statue, initialize the data of LP and download it again.
To Next Page
Loading...