6 System Screen
© Copyright Reserved Autonics Co., Ltd. 69
6.7.5 Synchronous serial
You can check the set status of synchronous serial output which outputs data by fixed timing with
Clock, Data, Latch signal.
This menu is for displaying the set synchronous serial at SmartStudio.
For synchronous serial information, refer to ‘SmartStudio user manual’.
Synchronous serial (SIO) is not set.
Synchronous serial (SIO) is set at SmartStudio.
No. Function and operation
①
Displays whether using synchronous serial (SIO) set.
② Displays the set output register value.
③ Displays the set data bit.
④ Displays the set number of data.
⑤ Displays the set data lead device.
⑥ Displays whether using ‘Device Extensions’.
Output data information range varies according to set data bits
Data bit Available output data range
4 bit 0x000 to 0x000F
5 bit 0x000 to 0x001F
6 bit 0x000 to 0x003F
7 bit 0x000 to 0x007F
To Next Page
Loading...