4 System Organization
34 © Copyright Reserved Autonics Co., Ltd.
4.2 Connection with controller
4.2.1 1:1 organization
You can organize the system to monitor the action element (device, parameter, etc) status of the
connected specified device during executing LP-S044 operation.
For monitoring inner device of LP-S044 and inner device of the connected controller at the same
time, refer to ‘12.3 UW correspondence table’.
If there are too much draw data, screen processing speed may be reduced. However, control
program speed is not affected.
To monitor external connected devices, be sure that draw data properly not to cause problems
for communication processing speed.
To Next Page
Loading...