Autonics LP-S044 - Set Parameter

6 System Screen
64 © Copyright Reserved Autonics Co., Ltd.
6.7 Set parameter
6.7.1 Filter
This menu is for displaying the set input filter value at SmartStudio.
For input filter setting, refer to ‘SmartStudio user manual’.
 Filter value is not set.
 Filter value is set at SmartStudio.
No. Function and operation
① Displays the set X0 to X7 filter values.
② Displays the set X8 to XF filter values.
③
Displays inner device to save the set filter value.
When inner device is set, it is able to control filter value as the designated device.
Change M device for using inner device to filter value. Filter value is available from 0 to 63(6bit).
Below table is for actual filter value by filter value. Please refer this for setting filter value.
Filter
time(ms)
Actual filter
value
Filter
time(ms)
Actual filter
value
0 0 7 17
1 1 8 19
2 4 9 22
3 6 10 24
4 9 15 37
5 11 20 52
6 14