3 Device Construction
32 © Copyright Reserved Autonics Co., Ltd.
3.2.2 Word device range
Mark Name Range
Size
UW READ AREA UW00000 to UW00014
UW00000 to
UW00014
00015 Word
UW WRITE AREA UW00015 to UW00029
UW00015 to
UW00029
00015 Word
UW USER AREA UW00030 to UW01999
UW00030 to
UW01999
01969 Word
R File device R0 to R3999F
UW02000 to
UW05999
04000 Word
F Special device F0 to F255
UW06400 to
UW06655
00256 Word
X Input device X0 to X255
UW04400 to
UW07255
00256 Word
Y Output device Y0 to Y255
UW08000 to
UW08255
00256 Word
T
Timer present
value
T0 to T255
UW11000 to
UW11255
00256 Word
C
Counter present
value
C0 to C255
UW16000 to
UW16255
00256 Word
M Auxiliary device M0 to M9999
UW20000 to
UW29999
10000 Word
L Link device L0 to L255
UW38000 to
UW38999
01000 Word
D Data device D0 to D9999
UW40000 to
UW49999
10000 Word
V Virtual device V0 to V255
UW06100 to
UW06355
00256 Word
3.3 Application of UW, UB corresponding
LP series is integrated with PLC and HMI device as one. You can monitor and control the device
of the additionally connected devices (PLC, etc).
General PLCs usually have same device name regardless manufacture and model type.
To monitor and control the device of the connected external device with LP series, it is needed to
divide devices between PLC’s and LP’s.
To divide devices between PLC’s and LP’s during drawing the data in GP Editor, LP device
should be as UW, UB device as following ‘12.3 UW correspondence table’
Additionally connected controllers is drawn with their characteristics device name.
To Next Page
Loading...