Autonics LP-S044 - Troubleshooting in Error for External Input; Troubleshooting in Error for External Output; Troubleshooting in Communication Connection Error

9 Troubleshooting
80 © Copyright Reserved Autonics Co., Ltd.
(3) Troubleshooting in error for external input
Check as following list by number. If error is not solved, please notify this to our service
center.
No Check item Error
1 Is input wiring connection correct?
2 Is connection status of input connector fine?
3
In case of removing connected input device and connecting COM port
of input terminal to input port, is input value entered correctly?
※
1
4 Is there a problem to input device operation?
※1. You can check input value in monitoring function of LP-S044 or in SmartStudio.
(4) Troubleshooting in error for external output
Check as following list by number. If error is not solved, please notify this to our service
center.
No Check item Error
1 Is output wiring connection correct?
2 Is connection status of output connector fine?
3 Is connected power voltage to output within allowable voltage range?
4 Is there problem to output device operation?
(5) Troubleshooting in communication connection error
Check as following list by number. If error is not solved, please notify this to our service
center.
No Check item Error
1
Do you designate communication configuration (baudrate, data bit, stop
bit, and parity) correctly?
2
Is the specification and wiring of communication cable rated at our
specification?
※
1
※1. For connect LP-S044, external device and PC, you must use the provided cable (sold
separately).