13
or, Press the Mute button again.
o The Mute button light turns off.
o The call is unmuted and the other person can hear you again.
To answer a call on a bridged line:
Answering a call on a bridged line is basically the same as a call on a primary line. If the ringing
line is selected, you can answer by picking up the handset or by pressing Speaker or Headset or
Answer.
1. Select the bridged call that you want to answer.
Note: The ringing line will be selected automatically if there are no other active calls. If
you are on another call when a call comes in to a bridged line, you have to select the
ringing line (just like for an incoming call to a primary line).
2. Press Answer.
o You are connected to the incoming call.
To make an outgoing call on a bridged line:
Note: When you make a call on a bridged line, you are using another person’s line. The caller ID
will show the call as coming from you or coming from the person whose line you are using. If
you have any questions about how the name or extension displays to the person you are
calling, contact MSU Telecom Systems.
1. Select the bridged line you want to use.
2. Press OK.
{dial tone}
3. Dial the telephone number, or call the person from the Contacts list, or call the person
from the Call Log list.
o The outgoing call is placed.
To Next Page
Loading...
Need help?
General
