BCM50 Hardware & Installation
16 NN40011-002 Issue 1.2 BCM50 Rls 6.0
Wiring Field Card
An optional wiring field card (WFC) is available with the wall mount bracket,
which provides RJ-45 connectors for all BCM50 Main Unit trunk and
telephones.
The wiring field card installs into the cable management tray of the wall mount
bracket and connects to the telephony connector through a 50-pin header.
The wiring field card contains:
12 eight-pin modular jacks for digital stations
4 eight-pin modular jacks for analogue trunks
4 eight-pin modular jacks for analog stations.
The eight-pin modular jacks accept RJ-45 or RJ-11 modular plugs.
There is also a terminal block for connecting auxiliary equipment and a
50-pin header to connect to the BCM50
Refer to the Installing the Wiring Field Card (WFC) section of this guide for
further information.
To Next Page
Loading...
