Avaya BCM50 - Installing the BCM50 Unit in an Equipment Rack

BCM50 Hardware & Installation
NN40011-002 Issue 1.2 BCM50 Rls 6.0 19
Installing the BCM50 Unit in an Equipment Rack
You can install a BCM50 unit in the same rack as other networking and
telecommunications equipment.
1. Position the rackmount shelf in the rack.
2. Align the holes in the rackmount shelf with the holes in the equipment
rack rails.
3. Fasten the rack mount shelf to the rack using the four rack screws
4. Place the BCM50 unit on the rack so that the unit’s feet are in the
depressions in the shelf.
5. Move the unit forward until the unit’s feet touch the front side of the
depressions.
6. Slide the unit back until the unit’s feet click in place on the tabs in the
depressions