Avaya BCM50 - Upgrading from BCM50 Rls 2.0 to Rls. 6.0

BCM50 Hardware & Installation
74 NN40011-002 Issue 1.2 BCM50 Rls 6.0
Upgrading from BCM50 Rls 2.0 to Rls. 6.0
Create a Backup of the Rls 2.0 software: refer to the Backup &
Restore Guide.
Obtain a Keycode file with the Rls 6.0 upgrade entitlement, and also
the Rls 6.0 Upgrade File and Factory Image: refer to the Pre-
Upgrade Activities section of this guide.
Ensure the Time Zone is not set to Factory Default: refer to the
Checking the Time Zone is Set Correctly section of this guide.
Ensure the DHCP Setting is not set to Enabled-Automatic: refer to the
Checking the DHCP Server Setting section of this guide.
Apply the Keycode File containing the Rls 6.0 upgrade entitlement:
refer to the Applying the Keycode File section of this guide.
Perform the Rls 2.0 to Rls 6.0 upgrade: refer to the Performing the
Upgrade section of this guide.
Apply the Rls 6.0 Factory Image: refer to the Applying the Factory
Image section of this guide.
Perform any required post-upgrade activities: refer to the Post-
Upgrade Activities section of this guide.