BCM50 Hardware & Installation
NN40011-002 Issue 1.2 BCM50 Rls 6.0 55
6. When the hardware type has been detected, you will be presented with
the option of applicable software releases to apply to the hard drive.
Enter the required software release.
7. If you have made an incorrect selection, enter n at the Do you wish to
continue… prompt (this will return you to the main menu). Otherwise,
enter y to confirm and continue.
Note: If the wrong software release is selected and confirmed, a new
replacement hard drive will be required as the following process is irreversible.
To Next Page
Loading...
