BCM50 Hardware & Installation
86 NN40011-002 Issue 1.2 BCM50 Rls 6.0
Post-Upgrade Activities
Below is an overview of activities once the BCM50 has been upgraded to
BCM Rls 6.0, and the Factory Image has been applied:
Apply any new patches, e.g. from the Smart Update DVD.
Re-install client applications, including Element Manager. Refer to the
relevant documentation for further information.
Configure any new BCM Rls 6.0 features that you require (keycodes
may be necessary to unlock some features).
To Next Page
Loading...
