Avaya E129 - COMPLETING CALLS

FIRMWARE VERSION 1.0.5.2 E129 SIP DESKPHONE USER MANUAL Page 16 of
60
handset, the E129 SIP DESKPHONE will be in off hook state and the dial tone will be heard. To make a
call,
dial out the number with the current line.
During the call, users can press the FLASH key to hold the current call and make/answer another call. If
they are 2 calls established, users can switch the two lines by pressing the FLASH key.
COMPLETING CALLS
There are several ways to complete a call on E129 SIP DESKPHONE.
 On hook dialing. Enter the number when the phone is on hook and then send out.
 When the phone is in idle, enter the number to be dialed out;
 Take handset off hook; or
Press Speaker button; or
Press Headset softkey with headset plugged in;
 The call will be dialed out.
 Off hook and dial. Off hook the phone, enter the number and send out.
 Take handset off hook; or
Press Speaker button; or
Press Headset softkey with headset plugged in;
 You shall hear dial tone after off hook;
 Enter the number;
 Press SEND key or # to dial out.
 Redial. Redial the last dialed number.
 Take handset off hook; or
Press Speaker button; or
Press Headset softkey with headset plugged in; or
When the phone is in idle;
 Press SEND key , or the REDIAL softkey.
 Via Call History. Dial the number logged in phone's call history.
 Press MENU button to bring up the main menu;
 Enter Call History and select "Answered Calls", "Missed Calls", "Transferred Calls" or "Forwarded
Calls";