Avaya E129 - Cancel Conference; End Conference; VOICE MESSAGES (MESSAGE WAITING INDICATOR)

FIRMWARE VERSION 1.0.5.2 E129 SIP DESKPHONE USER MANUAL Page 23 of
60
 During the 3-way conference, press HOLD key . The conference call will be split and both
calls will be put on hold separately;
 Press FLASH key to resume the 2-way conversation with the second established call;
 If users would like to re-establish conference call, press the ReConf softkey.
 Cancel Conference.
 If users decides not to conference after establishing the second call, press EndCall softkey;
 This will end the second call and the screen will show the first call on hold.
 End Conference.
 Press HOLD key to split the conference call. The conference call will be ended with both
calls on hold; Or
 Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
Note:
 The party that starts the conference call has to remain in the conference for its entire duration, you can
put the party on mute but it must remain in the conversation. Also, this is not applicable when the
feature "Transfer on call hangup" is turned on;
 The option "Disable Conference" under E129 SIP DESKPHONE Web GUI->Settings->Advanced
Settings has to be set to "No" to establish conference.
VOICE MESSAGES (MESSAGE WAITING INDICATOR)
A blinking red MWI (Message Waiting Indicator) indicates a message is waiting. Dial into the voicemail box
to retrieve the message by entering the voice mail number of the server or pressing the MESSAGE key
(Voice Mail User ID has to be properly configured as the voice mail number under Web
GUI->Account page). An IVR will prompt the user through the process of message retrieval.
CALL FEATURES