Avaya E129 - MAKING CALLS USING IP ADDRESSES

FIRMWARE VERSION 1.0.5.2 E129 SIP DESKPHONE USER MANUAL Page 17 of
60
 Select the entry you would like to call using the navigation "UP" and "DOWN" arrow keys;
 Press SEND key to dial out.
 Via Phonebook. Dial the number from the phonebook.
 Press MENU button to bring up the main menu;
 Select and enter Phonebook;
 Select the phonebook entry you would like to call using the navigation "UP" and "DOWN" arrow
keys;
 Press SEND key to dial out.
 Via Page/Intercom.
 Take handset off hook; or
Press Speaker button; or
Press Headset softkey with headset plugged in;
 You shall hear dial tone after off hook;
 Press MENU button to switch the call screen from "Line x: Caller DIAL" to "Line x: Caller Paging";
 Enter the number;
 Press SEND key or # to dial out.
Note:
 After entering the number, the phone waits for the No Key Entry Timeout (Default timeout is 4 seconds,
configurable via Web GUI) before dialing out. Press SEND key or # key to override the No
Key Entry Timeout;
 If digits have been entered after handset is off hook, the SEND key will works as SEND instead of
REDIAL;
 By default, # can be used as SEND to dial the number out. Users could disable it by setting "Use # as
Dial Key" to "No" from Web GUI->Account page;
 For Paging/Intercom, if the SIP Server/PBX supports the feature and has Paging/Intercom feature
code set up already, users might not necessarily need toggle to paging mode in the call screen on
E129 SIP DESKPHONE. Simply dial the feature code with extension as a normal call.
MAKING CALLS USING IP ADDRESSES