Avaya E129 - DURING A PHONE CALL; CALL WAITING;CALL HOLD; MUTE; CALL TRANSFER

FIRMWARE VERSION 1.0.5.2 E129 SIP DESKPHONE USER MANUAL Page 20 of
60
DURING A PHONE CALL
CALL WAITING/CALL HOLD
 Hold. Place a call on hold by pressing the HOLD key ;
 Resume. Resume call by pressing the HOLD key again;
 Multiple calls. Automatically place active call on hold or switch between two calls by pressing the
FLASH key . Call waiting tone (stutter tone) will be audible on incoming call during the active
call.
MUTE
During an active call, press the MUTE softkey to mute/unmute the microphone. The LCD will show "LINEx:
TALKING" or "LINEx: MUTE" to indicate the mute status, with Mute icon displayed on the right side of the
screen.
CALL TRANSFER
E129 SIP DESKPHONE supports Blind Transfer, Attended Transfer and Auto-Attended Transfer.
 Blind Transfer.
 During the first active call, press TRANSFER key and dial the number to transfer to;
 Press SEND key or # to complete transfer of active call.
 Attended Transfer.
 During the first active call, press FLASH key . The first call will be put on hold;
 Enter the number for the second call and establish the call;