Avaya E129 - NAT SETTINGS; PUBLIC MODE

FIRMWARE VERSION 1.0.5.2 E129 SIP DESKPHONE USER MANUAL Page 52 of
60
The E129 SIP DESKPHONE supports hot desking using public mode. Under public mode, users could
login the phone with the SIP account User ID and password. Please follow the steps below to configure the
phone for public mode:
 Under Web GUI->Account 1 setting page, fill up the SIP server address for account 1. Click "Update"
on the bottom of the page;
 Under Web GUI->Advanced setting page, set Public Mode option to "Yes". Click "Update" and reboot
the phone;
 When phone boots up, SIP User ID and Password to register to the configured SIP server in account 1
will be required. Enter the correct account information to log in to the phone. When entering the
account information, press softkey "123"/"abc" to toggle input method;
 In login page, pressing HOLD button on the phone will show phone's IP address;
 After using the phone, go to LCD MENU->LogOut to log off the public mode.
EDITING CONTACTS AND CLICK-TO-DIAL
From E129 SIP DESKPHONE Web GUI, users could view contacts, edit contacts, or dial out with
Click-to-Dial feature on the top of the Web GUI. In the following figure, the Contact page shows all
the added contacts (manually or downloaded via XML phonebook). Here users could add new contact,
export phonebook XML, import phonebook XML, search contact, filter contacts by group, edit selected
contact, or dial the contact/number.