Avaya E129 - Page 44

FIRMWARE VERSION 1.0.5.2 E129 SIP DESKPHONE USER MANUAL Page 45 of
60
pre/suffix changes, Always Skip the Firmware Check.
XML Config File Password
The password for encrypting the XML configuration file using OpenSSL.
This is required for the phone to decrypt the encrypted XML
configuration file.
HTTP/HTTPS User Name
The user name for the HTTP/HTTPS server.
HTTP/HTTPS Password
The password for the HTTP/HTTPS server.
Upgrade Via
Allows users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
Firmware Server Path
Defines the server path for the firmware server. It could be different from
the configuration server for provisioning.
Config Server Path
Defines the server path for provisioning. It could be different from the
firmware server for upgrading.
Firmware File Prefix
Enables your ITSP to lock firmware updates. If configured, only the
firmware with the matching encrypted prefix will be downloaded and
flashed into the phone.
Firmware File Postfix
Enables your ITSP to lock firmware updates. If configured, only the
firmware with the matching encrypted postfix will be downloaded and
flashed into the phone.
Config File Prefix
Enables your ITSP to lock configuration updates. If configured, only the
configuration file with the matching encrypted prefix will be downloaded
and flashed into the phone.
Config File Postfix
Enables your ITSP to lock configuration updates. If configured, only the
configuration file with the matching encrypted postfix will be downloaded
and flashed into the phone.
Allow DHCP Option 43 and
Option 66 Override Server
If DHCP option 66 is enabled on the LAN side, the TFTP server can be
redirected. The default setting is "Yes".
Automatic Upgrade
Enables automatic upgrade and provisioning. The default setting is "No".
Hour of the Day (0-23)
When "Automatic Upgrade" is set to "Yes, check for upgrade every day",
configure the hour of the day when the upgrading/provisioning starts.
Day of the Week (0-6)
When "Automatic Upgrade" is set to "Yes, check for upgrade every
week", configure the day of the week when the upgrading/provisioning
starts.
Authenticate Conf File
Authenticates configuration file before acceptance. The default setting is
"No".
Enable TR-069
Enables TR-069. The default setting is "No".
ACS URL
URL for TR-069 Auto Configuration Servers (ACS).