Issue 2.1 June 2006 1223
Converting software duplication link to a DAL1 link
on an
S8720 Media Server
!
Important:
Important: Always check the Avaya Support Web site for Product Support Notices at http://
support.avaya.com and select Communication Manager > Product Support
Notices.
This module describes the steps required to replace a software duplication link on an S8720
Media Server with the DAL1 duplication circuit pack (Material code 700262306):
● Before you start on page 1223
● Removing power from the server(s) on page 1224
● Removing the server from the rack on page 1225
● Removing the top cover from the server on page 1226
● Removing the riser assembly on page 1226
● Inserting the DAL1 circuit pack on page 1227
● Replacing the riser assembly on page 1228
● Replacing the cover on the server on page 1230
● Replacing the server in the rack on page 1230
● Restoring power to the server(s) on page 1231
● Connecting to the active media server on page 1232
● Accessing the media server maintenance web interface on page 1232
● Reconnecting the duplication cables on page 1233
● Reconfiguring the Ethernet interface on page 1234
● Checking system status on page 1235
Before you start
Verify that you have the following on site:
● DEF CP DAL1 (Material code 700262306) replacement duplication circuit pack
● Electrostatic wrist ground strap and mat
To Next Page
Loading...
Need help?
General
