Post-migration administration
Issue 2.1 June 2006 403
Closing all sessions
To close all sessions:
1. From the HyperTerminal window, when the upload finishes
The system displays a Command successfully completed message or an error message.
2. Type logoff. Press Enter.
Post-migration administration
This section describes the post-migration administration to complete the migration to the S8400
Media Server.
!
Important:
Important: When you format the compact flash card for use in the S8400 Media Server, all
data is erased from the compact flash card.
Note:
Note: Do not use the compact flash card (Comcode 700381841) in an S8100 Windows
system. The operation system does not recognize the compact flash card.
After the migration, you can format the compact flash card (Comcode 700381841) for the S8400
Media Server and use the compact flash card as the backup compact flash card.
Assigning IP addresses to the SIPI circuit packs
When you use static IP addressing, you must assign IP addresses to the SIPI circuit packs.
Using static addressing
You can administer static IP addresses for the SIPI circuit packs. You administer the addresses
directly through the Ethernet port connection on the SIPI faceplate (top port). For more
information, see Figure 6: Connecting directly to the SIPI
.
To Next Page
Loading...
Need help?
General
