Avery Dennison ALS 104 - 2.4 Inserting Label Material

28
3BEFORE OPERATION
2.4 INSERTING LABEL MATERIAL
ALS
104
GB
2.4.1 Prerequisites
The label dispenser is turned off at the main switch
– Standard machine: switch set to “O” [26A]
– Machine with dust/splash guard: switch does not
light [27A]
£ Check that the safety installations are working
properly.
£ Inspect the machinery for any visible damage.
Report any ascertained defects immediately.
£ Remove any unnecessary materials and objects
from the operating area of the unit.
£ Ensure that only authorised persons are within the
operating range of the machine.
£ Use the required personal protective equipment
correctly; forexample, wear a hairnet, safety
glasses.
[26] Main switch (A) on the housing.
[27] Main switch on ALS 104 with dust/splash guard option.
A
A
2.4 INSERTING LABEL MATERIAL