39
4OPERATION
4.2 CONFIGURATION AND MONITORING
ALS
104
GB
Dispensing speed
The dispensing speed can be set to a fixed value or can
be configured to automatically adjust to the speed of
the conveyor belt (speed adaption). The second
possibility requires a speed sensor to be connected; it
measures and relays the conveyor speed to the
dispenser.
Configuring a fixed value:
£ Set the speed in dispensing mode with the two left
keys (see “Dispensing mode” on page 24).
Configuring speed adaption:
£ Turn the function on by setting MACHINE SETUP >
Speed Adaption to ‘On’.
£MACHINE SETUP > Encoder Resol. and
MACHINE SETUP > Encoder Diameter set as
appropriate for the employed speed sensor.
– See the service manual for information on
suitable speed sensors.
To Next Page
Loading...
