Pendant NPT Mount
Note: The NPT pipe and NPT-female to NPT-female adapter are not supplied by Avigilon and
should be sourced separately. However, if you are using the NPT adapter (NPTA-1001), the lock
nut is included.
1. NPT pipe
NPT pipe used for a pendant mount with the NPT adapter (NPTA-1001).
2. Lock nut
Locking nut for securing the pendant NPT mount on the NPT pipe.
3. Tamper resistant screws
Star-shaped captive screws to fix the mounting adapter to the pendant NPT mount.
Note: There are 3 captive screws on the NPT mount. Only 2 screws are shown in the figure
above.
4. Lanyard
Connects to the lanyard anchor on the mounting adapter.
5. NPT adapter
Used to mount the dome camera to NPT pipes.
Pendant NPT Mount 15
To Next Page
Loading...
