Pendant Mount Installation
Required Tools and Materials
The following tools are required to complete the installation but are not included in the package:
If you will be installing the NPT adapter (NPTA-1001), you will need:
l
1-1/2" NPT female to female adapter
l
NPT pipe
Camera Package Contents
The H5A Multisensor camera has a variety of different mounting, dome cover, camera and accessory
options. The components for each H5A Multisensor camera will arrive in a camera package, a dome cover
package, a mounting adapter package, a mount package (for pendant cameras), and an optional IR Ring
package.
Ensure the camera package contains the following:
l
Avigilon H5A Multisensor Camera module. A 3- or 4-sensor camera module with 3 MP, 5 MP, or 4K (8
MP) resolution per sensor.
l
Audio, external power, and I/O pigtail cable connector
l
RJ45 CAT5E plugs (x2)
l
RJ45 connector waterproof gland
Ensure the Pendant mount adapter package contains the following:
l
Pendant mount adapter (H5AMH-AD-PEND1)
l
Installation instructions sheet
If you are installing the camera with the pendant wall mount, ensure the package includes the following:
l
Pendant wall mount (WLMT-1001)
l
Mounting template sticker
If you are installing the camera with the NPT mount, ensure the package includes the following:
l
NPT mount (NPTA-1001)
l
Lock nut
l
Thread sealing tape
Ensure the dome cover package contains the following:
l
Clear or smoked dome bubble and cover (H5AMH-DO-COVR1 or H5AMH-DO-COVR1-SMOKE)
If you are installing the camera with the optional IR illuminator, ensure the package includes the following:
Pendant Mount Installation 17
To Next Page
Loading...
