Focusing the H5A Multisensor Cameras
Ensure this procedure is performed after the dome cover is installed so you can accommodate for the focus
shift caused by the dome bubble.
Note: Ensure you adjust the focus for each of the camera heads included with your H5A
Multisensor camera.
In the camera web browser interface or the Avigilon Control Center software, use the camera’s Image and
Display settings to focus the camera.
1. Click Auto Focus to focus the lens.
2. Use the focus near and far buttons to manually adjust the focus.
Focusing the H5A Multisensor Cameras 70
To Next Page
Loading...
