PoE Power
Level
IR
Ring
Seamless
Failover
Supported
Reboot When
Aux Power Is
Removed
Camera Power State After Aux Power Is
Removed
30W PoE Yes No Reboot likely
unless IR is
turned OFF when
Aux power is
removed
(daytime, or
disabled etc).
Limited Power
< 30W PoE Yes or
No
No Reboot likely, but
not guaranteed.
Insufficient Power
Power States
With the addition of seamless failover and two active power sources, more information will be provided in the
About section of the camera WebUI. For more information, see the Web Interface User Guide — Avigilon
High Definition H4 and H5 IP Cameras.
Examples of Power States Definition
Aux + 60W PoE Both Aux and PoE 60W are connected.
Aux + PoE+ Both Aux AND PoE+ are connected.
Aux + PoE Both Aux and PoE are connected.
This allows you to see what power sources are connected and ensures that the PoE power source is
adequate to take over the camera operation if the Aux power source is disconnected and you want to have
seamless failover.
Power States 69
To Next Page
Loading...
