Avigilon 9C-H5A-3MH - Accessing the Live Video Stream

To Next Page

To Previous Page

169.254.0.0/16 subnet.

The IP address settings can be changed using one of the following methods:

Device's web browser interface: http://

<camera IP address>/

Network Video Management software application (for example, the AvigilonControl Center™

software).

ARP/Ping method. For more information, see

Setting the IP Address Using the ARP/Ping Method

page74.

Note: These cameras do not have a default username or password and will be in a factory default

state. You must create a user with

administrator

privileges before the camera is operational. For

more information, see

Initializing a Camera Username and Password

on page58.

Note: You will be unable to connect an H5A Multisensor camera to ACC™ software version 6.12 or

older if any of the H5A Multisensor heads have their Format set to H.265 on the Compression and

Image Rate page of the camera's web interface. To connect an H5A Multisensor camera to an ACC

system, be sure to set the Format to H.264 or to upgrade the ACC software to v6.12.2 or later.

Accessing the Live VideoStream

Live video stream can be viewed using one of the following methods:

The mobile web interface using the USB Wifi Adapter. For more information, see (Optional) Using the

USB Wi-Fi Adapter.

Web browser interface: http://

< camera IP address>/

Network Video Management software application (for example, the AvigilonControl Center software).