Avigilon 9C-H5A-3MH - Initializing a Camera Username and Password

2. Access the camera’s web interface to enable the onboard storage feature. For more information, see
the Avigilon High Definition H.264 Camera Web Interface User Guide .
Initializing a Camera Username and Password
Important: You must create a user with administrator privileges before the camera is operational.
The first user can be created using any of the following methods:
l
Camera's Web Interface: enter the camera's IPaddress in a web browser to access the web
interface. If the camera is in the factory default state you will be redirected to the Add a new user page
to create the first user. For more information, see the Avigilon High Definition H4 and H5 IP Camera
Web Interface User Guide.
l
Camera Configuration Tool: cameras discovered in the factory default state will be identified by .
Select the Admin Users tab to create the first user. For more information, see the Avigilon Camera
Configuration Tool User Guide .
l
USB Wi-Fi Adapter: when connecting a camera in the factory default state, you will be redirected to
the Create Administrator User page to create the first user. For more information, see Motorola
Solutions USB Wi-Fi Adapter System User Guide .
l
Avigilon Control Center software version 7.4 or later, or version 6.14.12 or later: when connecting a
camera in the factory default state, the client software will ask you to create a new user. For more
information, see the Avigilon Control Center Client User Guide.
l
AvigilonCloud Services (ACS) v3.0 or later: when adding a camera you will be asked to create a new
user for cameras in the factory default state. For more information, see the AvigilonCloud Services
User Guide .
Initializing a Camera Username and Password 58