Camera Top View
1. Serial number tag
Device information, product serial number and part number label.
2. Camera heads
The multiple camera heads that can be moved, aimed and focused to monitor different scenes.
Note: There may be three or four camera heads depending on your camera model.
3. Firmware revert button
Resets the H5A Multisensor camera. For more information, see
Resetting to Factory Default Settings
on page73.
4. Camera mounting screws
Captive screws to fix the camera to the mounting adapter.
5. PoE Mode Switch
Selector switch to provide compatibility with legacy HPoE injectors not compatible with the 802.3bt
standard. The "B" position is the default. The "A" position should be used for injectors PD-9501G, PD-
9501GR, and PD-9601G.
6. microSD card slot
Accepts one or two microSD cards for onboard storage.
7. micro USB connector slot
Accepts a micro USB connector for connecting mobile and compact devices.
Camera Top View 9
To Next Page
Loading...
