Avigilon 9C-H5A-3MH - In-Ceiling Mount Installation; Camera Package Contents; In-Ceiling Mount Installation Steps; Preparing the Camera for In-Ceiling Installation

In-Ceiling Mount Installation
Camera Package Contents
The H5A Multisensor camera has a variety of different mounting, dome cover, camera and accessory
options. The components for each H5A Multisensor camera will arrive in a camera package, a dome cover
package, and a mounting adapter package.
Ensure the camera package contains the following:
l
Avigilon H5A Multisensor Camera module. A 3- or 4-sensor camera module with 3 MP, 5 MP, or 4K (8
MP) resolution per sensor.
l
Audio, external power, and I/O pigtail cable connector
l
RJ45 CAT5E plugs (x2)
l
RJ45 connector waterproof gland
Ensure the In-Ceiling mount adapter package contains the following:
l
In-ceiling mount adapter (H5AMH-AD-CEIL1)
l
Cable entry cover
l
Installation instructions sheet
l
Mounting template sticker
Ensure the dome cover package contains the following:
l
Clear or smoked dome bubble and cover (H5AMH-DC-COVR1 or H5AMH-DC-COVR1-SMOKE)
If you are installing the in-ceiling camera with the metal ceiling panel, ensure the package includes the
following:
l
Metal ceiling panel (CLPNL-1001)
In-Ceiling Mount Installation Steps
Complete the following sections to install the device.
Preparing the Camera for In-Ceiling Installation
Before starting the installation, prepare the in-ceiling adapter for installation:
1. If you are planning to use onboard storage, insert a microSD card into the SD card slot on the H5A
Multisensor camera. For more information, see (Optional) Configuring microSD Card Storage on
page57.
2. Use a screwdriver to push each of the clamps into their top positions and ensure their springs are fully
compressed. In one smooth motion, push each clamp up (a), clockwise (b), up again (c), and then
In-Ceiling Mount Installation 50