Avigilon 9C-H5A-3MH - (Optional) Cutting the Mounting Hole for the In-Ceiling Mount Adapter

76 pages

To Next Page

To Previous Page

counter-clockwise (d).

(Optional) Cutting the Mounting Hole for the In-Ceiling Mount

Adapter

This procedure is not required if you are planning to install the camera with a metal ceiling panel (CLPNL-

1001).

(Optional) Cutting the Mounting Hole for the In-Ceiling Mount Adapter 51

Main Page

Table of Contents5
Overview8
Camera Module8
Camera Back View8
Camera Top View9
Surface Mount Adapter10
Pendant Mount Adapter11
In-Ceiling Mount Adapter12
Outdoor Dome Cover13
In-Ceiling Dome Cover13
Pendant Wall Mount14
Pendant NPT Mount15
Preparing the Installation16
Pre-Deployment In-Box Configuration16
Pendant Mount Installation17
Required Tools and Materials17
Camera Package Contents17
Pendant Mount Installation Steps18
(Optional) Installing the pendant Wall Mount18
(Optional) Installing the NPT Mount Adapter20
Installing the pendant Mounting Adapter22
Connecting Cables24
(Optional) Configuring Microsd Card Storage26
Initializing a Camera Username and Password27
(Optional) Using the USB Wi-Fi Adapter28
Assigning an IP Address28
Accessing the Live Video Stream29
Installing the H5A Multisensor Camera Base to a pendant Mount30
Aiming the H5A Multisensor Camera30
(Optional) Installing the IR Illuminator Ring31
Installing the pendant Mount Dome Cover33
Surface Mount Installation35
Camera Package Contents35
Surface Mount Installation Steps35
Installing the Surface Mount Adapter35
Connecting Cables39
(Optional) Configuring Microsd Card Storage41
Initializing a Camera Username and Password42
(Optional) Using the USB Wi-Fi Adapter43
Assigning an IP Address43
Accessing the Live Video Stream44
Installing the H5A Multisensor Camera Base to a Surface Mount45
Aiming the H5A Multisensor Camera45
(Optional) Installing the IR Illuminator Ring46
Installing the Surface Mount Dome Cover48
In-Ceiling Mount Installation50
Camera Package Contents50
In-Ceiling Mount Installation Steps50
Preparing the Camera for In-Ceiling Installation50
(Optional) Cutting the Mounting Hole for the In-Ceiling Mount Adapter51
(Optional) Attaching the Conduit Cable Entry Cover for Plenum Installations52
Installing the In-Ceiling Mounting Adapter53
Connecting Cables55
(Optional) Configuring Microsd Card Storage57
Initializing a Camera Username and Password58
(Optional) Using the USB Wi-Fi Adapter59
Assigning an IP Address59
Accessing the Live Video Stream60
Installing the H5A Multisensor Camera Base to an In-Ceiling Mount61
Aiming the H5A Multisensor Camera61
Installing the In-Ceiling Mount Dome Cover62
For more Information64
Cable Connections65
Connecting to Power, Audio, and External Devices65
Pigtail Connector and Wires65
Wiring Audio, I/O, and aux Power66
Seamless Failover67
Connecting Poe and Auxiliary Power Simultaneously67
Power Source Priorities68
Seamless Failover for Different Operating Conditions68
Power States69
Focusing the H5A Multisensor Cameras70
Connection Status LED Indicator71
Troubleshooting Network Connections and LED Behavior71

Avigilon 9C-H5A-3MH - (Optional) Cutting the Mounting Hole for the In-Ceiling Mount Adapter

Table of Contents

Related product manuals