Power Source Priorities
The H5A Multisensor camera prioritizes auxiliary power so that if both power sources are connected,
auxiliary power disables the PoE connection and provides power to the camera whenever it is present. The
presence of auxiliary power does not disable or corrupt the PoE connection. If auxiliary power is interrupted,
the camera will switch to drawing power from the PoE port without any interruption in operation.
The camera draws power from either auxiliary or PoE power, but never from both or shared. The only
exception is the small amount of power that the PoE connection may require to stay connected. If the priority
power supply is removed and then reconnected, the camera will automatically switch back to drawing
current from the priority power supply when it is available.
For more information, see Connecting to Power, Audio, and External Devices.
Seamless Failover for Different Operating Conditions
PoE Power
Level
IR
Ring
Seamless
Failover
Supported
Reboot When
Aux Power Is
Removed
Camera Power State After Aux Power Is
Removed
60W/90W
PoE
Yes or
No
Yes No Full Power
30W PoE No Yes No Limited Power
Power Source Priorities 68
To Next Page
Loading...
