Avigilon 9C-H5A-3MH - Page 32

1. Mount the IR illuminator ring into the dome cover (H5AMH-DO-COVR1 or H5AMH-DO-COVR1-
SMOKE):
a. Insert the IR ring into the dome cover so that the orange arrow on the IR ring aligns with the
orange tab on the dome cover.
b. Use a screwdriver to secure the IRring to the dome cover by tightening the 6 setscrews.
2. (Recommended) Attach a safety lanyard from the mounted camera to the lanyard anchor on the
dome cover to prevent the cover from falling. See Installing the Pendant Mount Dome Cover on the
next page.
3. Push the IR ring cable onto IR connector on the camera base and turn the connector clockwise to
secure the connection.
(Optional) Installing the IR Illuminator Ring 32