Avision DF-1015S - Page 106

User’s Manual
19. Press the Enter key to confirm your selection.
20. The LCD-display shows “Ready to scan”. Place your
document in the scanner.
Ready to scan
fBack
21. Press the Scan button on the scanner.
22. The scanner starts scanning and your scanned image will
be saved into your USB Flash Drive.
Note：
1. If “Document mode” is selected, a main folder with its
sub-folder titled “DCIM\DOC” will be created on your USB
flash drive. Up to 9,999 PDF files can be stored in the
folder. Each PDF file will be named with a prefix of “DOC”
and followed by a 4 digit serial number. For example,
DOC0001.PDF, DOC0002.PDF。)
2. If “Photo mode” is selected, a main folder with its sub-
folder titled “DCIM\PHOTO” will be created on your USB
flash drive. Up to 9,999 JPEF files can be stored in the
folder. Each JPEG file will be named with a prefix of “IMG”
followed by a 4 digit serial number. For example,
IMG0001.jpg, and IMG0002.jpg。)
8-3