Paper becomes jammed during scanning.
Answer: 1) Open the ADF unit.
2) Pull out the jammed paper carefully.
3) Close the ADF unit.
Question:
More than one sheet of paper was fed into
the scanner.
Answer: 1) Open ADF unit.
2) Remove the multi-fed sheets of paper.
3) Close the ADF unit.
4) Flatten the corners and edges; loosen
the paper before reloading it in the paper
guide.
5) Check the feeding roller condition and do
the cleaning if necessary.
Question: Paper becomes skewed in the scanner.
Answer: 1) Check the feeding roller condition; do
the cleaning if necessary.
2) Use the paper guide when feeding the
paper.
Question: The scanned image always comes out to
be too dark.
Answer:
1) Please adjust the screen settings to
SRGB.
2) Please adjust the brightness settings on
the screen from application software.
10-4
To Next Page
Loading...
