Note:
• One end of the supplied USB Y cable includes two USB
connectors (one labeled “Power Cable”, the other labeled
“Data Cable”). If only one USB port is available from
your computer, please plug the connector labeled “Power
Cable” to your computer while charging the battery and
plug the connector labeled “Data Cable” to your
computer while downloading the images. If there are two
USB ports available, it is recommended to plug these two
connectors to your computer.
• Use the supplied USB Y cable only to this scanner. Using
this USB Y cable to other devices may cause unexpected
damage.
• If the battery is fully charged, an A4-size page can be
scanned in color for 200 times.
• If there is not enough battery power to perform a scan,
the system LED will be flashing in red color.
To Next Page
Loading...
