AVL DITEST Speed 2000 - Scope of Supply and Accessories; Basic Equipment; AVL Exhaust Gas Tester Adapters; Universal Adapter Package

ENGLISH
AVL DiTEST Speed 2000
16
Operating Manual
2 Scope of Supply and Accessories
2.1 Basic Equipment
Order number
AVL DiTEST Speed 2000
BO7787
AVL Dual Sensor
BO2338
Operating manual
AT7719
Fastening elements
The AVL DiTEST Speed 2000 is available as two different models:
AVL adapter packages for AVL exhaust gas testers
These packages for AVL exhaust gas testers include an adapter to connect the AVVL DiTEST
Speed 2000 and the exhaust gas tester.
Contact your AVL DiTEST branch/partner in your country to ensure that you get the correct
package.
Universal adapter package for other exhaust gas testers
This package includes a universal connection adapter (Fig. 2-1) in addition to the basic equipment.
A power supply unit is required (not included in package).
Recommended power supply unit: Order no. EN0342 (Fig. 2-2).
2.2 Exhaust Gas Tester Adapter
Connection cable for AVL exhaust gas testers:
Order number
AVL 400 series
BV2110
AVL 4000 series
BV2111
AVL DiGas 2200
BV7139
AVL DO 285
GE7043
Universal adapter Order no. EU1843
− The AVL DiTEST Speed 2000 delivers a simulated
clamp-on transducer signal at this connection point.
− This connection point acts as a substitute for a clamp-on transducer.
− Any exhaust gas tester with its own special clamp-on transducer
cable can be connected here for diesel speed measurements.
Fig. 2-1
External power supply for the AVL DiTEST Speed 2000 Order no. EN0342
− (12V, 350mA - for details, see Technical Data)
Fig. 2-2
2.3 Accessory
Extension cable (5m) for AVL dual sensor: Order no. BV2113 (not illustrated).