4 Startup - Connection to Exhaust Gas Tester
4.1 Connection to AVL Exhaust Gas Tester
The AVL DiGas 2200 is used as an example here.
Fig. 4-1
Settings for the AVL exhaust gas tester
Depending on the AVL exhaust gas tester that you are using, choose one of the following settings in
the appropriate speed sensor selection menu:
− "AVL DiSpeed"
− " TDC digital sensor (1 pulse/cycle)"
− " Automatic "
− " Diagnostic plug (1 pulse/cycle)"
− " Optical pick-up (1 pulse/cycle)"
Always follow the instructions in your exhaust gas tester manual!
To Next Page
Loading...