http://www.avl.com
Pin assignment
40
4.5.6 Debug/JTAG Connection: X27
Fig. 28 Debug/JTAG connection: X27
Pin Signal Description
1 DGND Ground
2 FLASH Ry/By
3FLASH WEn
4 VDD out (3.3V) max. 50 mA
5DGND
6nc
7DGND
8 WDDIS Watchdog disabled
9EMUn Emulation
10 nc
11 TMS Test Machine State
12 TCK Test Clock
13 TRSTn Test Reset
14 TDI Data in
15 TDO Data out
Case Shielding Shielding
Table 11
1
15
WARNING:
This connector may only be used for the production test.
No cable may be connected during regular operation.