axing MK 8-00 User Manual

Operation instructions | MK 8-00 | MK 16-00 | MK 8-06 | MK 16-06
20 2018-10-05 | Technical improvements, changes in design, printing- and other errors expected.
Assigning programmes
Every tuner is assigned to a modulator. The programmes of the tuner can only be assigned to the associated
modulator.
For example click in table TUNER 1 on M1.
The program is assigned to modulator 1. The button of the modulator is highlighted in color (a new click on
a modulator allow the assignment to be canceled. The modulator fades then again).
Choose the programmes for TUNER 1 to TUNER 8/16.
Click on SAVE CHANGES.
The assignment is saved tot he device.
3.4.2. Cross Multiplex Mode
The cross multiplex mode is used:
∂ To split the programmes of a transonder to several modulators.
∂ To merge pogams of several transponders into one output channel.
Transmission capacities in the distribution networks can be optimized.
Change the Network ID to a value greater than zero.
Choosen
programs for
modulator 1

axing MK 8-00 Specifications

General

Brand	axing
Model	MK 8-00
Category	Tuner
Language	English