axing MK 8-00 User Manual

Operation instructions | MK 8-00 | MK 16-00 | MK 8-06 | MK 16-06
30 2018-10-05 | Technical improvements, changes in design, printing- and other errors expected.
3.7. Maintenance
The menu entry MAINTENANCE enables software updates, changing the IP address, changing the password,
restarting the headend and erasing service data.
Under Current Settings, you will find the following information:
∂ Firmware version: Displays the firmware version and the output modulation type.
∂ Software version: Displays the version of the interface
∂ Serial number of the device
∂ Processor temperature - must remain below 90° C
∂ Ventilation temperature - must remain below 50° C (only from hardware version 12-2018)
∂ RF output level OK (only from hardware version 12-2018)
Important: If you stay on the maintenance page for more than 2.5 minutes, an automatic logout will occur
and you will have to repeat the login procedure.
3.7.1. Updating software
After an update, initialization data saved with older Software versions can be loaded into the headend with
a newer Software version.
Initialization data saved with the current Software versions can not be loaded into headends with an
older Software version.
Therefore, if possible, make a Software update of all headends.
We recommend the AXING SMARTPortal for easier handling and overview (see 1.6 on page 6)
Download
Software updates are available at https://axing.com/en/downloads/software-and-firmware/
> Software for compact headends
Download the current version of the file to your computer and unpack it.

axing MK 8-00 Specifications

General

Brand	axing
Model	MK 8-00
Category	Tuner
Language	English