Operation instructions | MK 8-00 | MK 16-00 | MK 8-06 | MK 16-06
42 2018-10-05 | Technical improvements, changes in design, printing- and other errors expected.
4. Use of CA modules
4.1. Insertion of CA modules
Up to six CA modules can be inserted into the CI-slots at the front side of the MK 8-06 or MK 16-06.
Carefully insert the CA modules to the corresponding CI slot without exerting force.
4.2. CI menu for SKM 4x-04M
In the CI menus, settings of CA modules can be made. The buttons for opening the CI menu will be activated
after the modules have been plugged in and initialised.
Click one of the buttons.
The corresponding CI menu is displayed.
4.2.1. Using CI menu
The content of the CI menu depends on the CAM manufacturer and the card being used. Depending on the
manufacturer, various settings are possible. Information on validity and authorisation are the most important.
Please observe the operating instructions provided by the manufacturer.
According to the used CAM different settings can be done. Most important is getting information about
authorisation.
The input and navigation field is used for navigation within the CI menu.
The Content depends on used
CAM
Input and navigation field
Active buttons for
the CI menu.
To Next Page
Loading...
Need help?
General
