2018-10-05 | Technical improvements, changes in design, printing- and other errors expected. 23
3.4.4. LCN (Logical Channel Numbering)
During the scan of TV stations, the stations are usually saved in the sequence of the channel lists in tuner 1-4.
The LCN function enables channel allocation for the station scan of the TV devices. The TV device must support
the LCN function.
∂ LCN can be used in REMUX as well as in Cross-Multiplex-Mode.
∂ Different LCN standards can be selected with the drop down menue Region. This standard may vary from
area to area.
∂ An LCN can only be entered for programs assigned to a modulator.
Click on the LCN column for the corresponding program.
Enter the LCN with the keyboard or increase / decrease the LCN with the arrow buttons right of the number.
Enter a separate LCN for each desired program.
To clear the LCN, enter 0 in the LCN column.
Click SAVE CHANGES.
The numbers of the channels are saved.
To Next Page
Loading...
Need help?
General
