axing MK 8-00 User Manual

Operation instructions | MK 8-00 | MK 16-00 | MK 8-06 | MK 16-06
22 2018-10-05 | Technical improvements, changes in design, printing- and other errors expected.
Assigning programmes to the modulators
In the cross multiplex mode, the tuners are no longer assigned to one modulator.
Click the table TUNER 1 to TUNER 4 on M1.
The programs are assigned to modulator 1.
Spliting the programmes of a transonder
If there are to much programms transmitted in one transponder, they can be splitted to several modulators.
 For example: choose modulator M1 for two programmes and modulator M2 for two other programmes.
3.4.3. Select all programs
Activate the option Select all incoming programs, with each program of the tuner the modulator button
is activated.
Note: If the option is activated, then no settings can be made in the columns LCN, decrypt etc.
Programs,
which are
assigned to
modulator 2
The programms of
one transponder
are spitted to two
modulators

axing MK 8-00 Specifications

General

Brand	axing
Model	MK 8-00
Category	Tuner
Language	English