44 USER MANUAL ME-01
18. Special functions description
All scales besides basic metrological functions: weighing and taring, have a set of special functions.
Depending on meter type functions set differs. Below a list of functions available in standard ME-01 type
meters:
Products data base (Prod),
Users data base (USEr),
pieces counting function (PCS),
change of mass unit (UnIt),
percentage weighing function (PErC),
selecting label number function (LAbEL),
weighing large animals function (LOC),
entering tare function (tArE),
maximum value indication function (UP)
force measuring function (nEWton)
statistical calculations (StAt)
paperweight calculation function (PAPEr)
and functions that require additional equipment to be completely functional:
option with accumulator supply:
- Setting accumulators charging (bAttErY)
- Automatic switching off scale function (AutoOFF)
options with the clock:
- setting current date and time function (dAtE)
- total weight function (totAL)
options with the transoptors connectors (WY ):
- checkweighing function (thr)
option with radio connection:
- function of choosing communication channel (rF Chn)
LabEL function is available in scales with EPL or EPL-A transmission protocol activates (go to
SetuP/SErIAL).
In scales with LED display special functions don’t have additional marks on display and names of some
functions are shortened.
To Next Page
Loading...
Need help?
General
