50 USER MANUAL ME-01
18.3 Percentage weighing function (PErC)
This function allows displaying weighing result in
percents.
A measurement is performed in two phases:
- first phase – weighing a reference sample
(100%),
- second phase – measuring specific sample
as a percentage of the reference sample.
Weighing result is displayed in different format,
depending on the weight value of reference
sample.
The function has the following options:
- PEr oFF – disable the function,
- PEr on– set current scale indication as 100%
and activate percentage weighing,
-out- exit without changing settings.
Note:
1. PEr Err message informs that reference 100% mass is less than 0,5*Min or was not defined.
2. In scales with LCD display sign "
■
" is replaced with %.
To Next Page
Loading...
