AXIS Q1602 Network Camera
Detectors
Detectors
Camera Tampering
Camera Ta m per ing can gene ra te an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely
defocused. To send an alarm, for example an email, an action rule must be set up.
To configure tampering:
1. Go to Detectors > Camera Tampering.
2. Set the Minim um duration, that is, the time that mus t elapse before an alarm is generated. This can help prevent false
alarms for known conditions that affect the image.
3. Select Alarm for dark images if an alarm s hould be generated if lights are dimmed or turned off, or if the lens is sprayed,
covered, or rendered severely out of focus.
4. Click Save .
To confi gure the product to send an alarm when tampering occurs:
1. Go to Events > Action Rules.
2. Click Add to set up a new action rule.
3. Enter a Name for the action ru le.
4. Under Condition,selectDetectors from the Trigger list.
5. Select Tamperin g from the list of detectors.
6. Optionally, select a schedule and set additional conditions.
7. Select the action. To se nd an email, select Send Notification a
nd select a Recipient from the list of defined recipients.
Note
The While the rule is active option under Duration cannot be used w ith camera tampering, since camera tampering does not
have a duration and once it has been triggered it will not automatically return to its untriggere d s tate .
For more information on actions rules, see
Events, on page 30
.
Motion Detection
Motion detection is used to generate an alarm w hen ever movement starts or stops in the camera view.
Motion detection is configured by defining up to 10 Include and Exclude windows:
• Include windows —defi ne areas where motion should be detected
• Exclude windows —define areas within an Include window that should be ignored (areas outside Include windows
are automatically ignored).
For instructions, see
Set Up Motion Detection Windows, on page 27
.
To control the number of motion det ection alarms, the parameters Object Size, History and Sensitivity can be adjusted. See
Motion
Detection Parameters, on page 27
.
Once motion detection w indow s are configured, the Axis p roduct can be configured to perform actions w hen motion is detected.
Possible actions include uploading images and start recording. For more information, see
Setting Up an Action Rule, on page 31
.
26
To Next Page
Loading...
Need help?
General
